Siemens EH6 TL1 Series Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Hob Siemens EH6 TL1 Series. Siemens EH6 TL1 Series 16 pages.
Print Page
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Use limitations
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture). If this is
not the case, the
and
›
Š
hotplate display; then it will automatically set the power level
In hotplate number 1, the Powerboost function can be activated
at any time.
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Switching a hotplate off automatically
Enter the cooking time for the desired hotplate. The hotplate will
switch off automatically once this time has elapsed.
How to program
Select the cooking power required.
1.
Press the
0
symbol. The
2.
selected hotplate. In the time program function display
appears. To select another hotplate, press the
several times, until the
x
lights up.
Press the + or - symbol on the time program function.
3.
The basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time will start to count down.
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
10 seconds. The
x
indicator lights up on the hotplate display.
Pressing the
symbol turns off the indicators and stops the
0
beep.
.
Š
symbols will flash on the selected
x
indicator lights up on the
symbol
0
indicator of the required hotplate
‹‹
appears for
To activate
Select the power level
1.
Press the + symbol. On the hotplate, the
2.
appear. You have now activated the function
To switch off the hotplate
.
Press the - symbol. The
Š
the hotplate returns to power level
has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Changing or cancelling the time
Press the
symbol several times until the required
0
x
indicator lights up. Change the cooking time using the
+ or - symbols, or set to
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press the
0
symbol several times until the
required hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■
Automatic timer
‹‹
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
symbol several times until the required
0
indicator lights up. Change the cooking time using the + or -
symbols, or set to
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
symbol several times until the
0
1.
up.
appears in the time program function display.
‹‹
Press the + or - symbol on the time program function.
2.
The basic setting will appear.
+ symbol: 10 minutes.
- symbol: 05 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
.
Š
›
indicator is no longer displayed and
›
Š
. The Powerboost function
.
‹‹
x
indicator for the
‹‹
.
indicator will
x
indicator lights
W
9