Siemens EH6..ME3 SERIES Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Hob Siemens EH6..ME3 SERIES. Siemens EH6..ME3 SERIES 20 pages.
Also for Siemens EH6..ME3 SERIES: Instruction Manual (20 pages)

Print Page

Hotplates

Hotplate

Single hotplate

Broiler

Resistive plate-warming zone

* The residual heat indicator lights up.

Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching a hotplate that displays

this.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.

To switch on: press the

main switch lights up. The hob is ready for use.

To switch off: press the

main switch disappears. All hotplates are off. The residual heat

indicator stays on until the hotplates have cooled down

completely.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Turning on and off

Use a correctly sized pan

The broiler turns on automatically when a pan large enough to reach its outer

edges is placed upon it.

To activate: press the

To deactivate: press the

symbol. The indicator above the

symbol until the indicator above the

symbol and

appears in the display.

‚

symbol again and

Even when switched off, the

the hotplate remains hot.

If the pan is removed before the hotplate is turned off the

indicators and the selected power level will appear alternately.

Selecting the power level

The range must be switched on.

Press the

symbol of the desired hotplate. The

symbols light up in the display.

Within the next 10 seconds, slide a finger on the

programming panel until the desired power level lights up.

Changing the power level: select the hotplate and set the

desired level using the programming panel.

Switch off the hotplate

Select the hotplate and set it to

The hotplate turns off and the residual heat indicator appears.

Notes

Upon selecting a hotplate the

■

then proceed to be adjusted.

If no pan has been placed on the induction hotplate, the

■

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

‹

appears in the display.

light will remain on as long as

•

and

‹

in the programming panel.

symbol is displayed. It may

•