Siemens EH8 SB1 Series Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Hob Siemens EH8 SB1 Series. Siemens EH8 SB1 Series 12 pages.
Also for Siemens EH8 SB1 Series: Instruction Manual (16 pages)

Print Page

To access the basic settings

The hob must be turned off.
Turn on the hob with the main switch.
1.
Within the next 10 seconds, press the
2.
4 seconds.
is displayed on the left of the screen and
™‚ y

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■
Glass scraper
Remove dried-on food remains using a glass scraper.

Fixing malfunctions

Malfunctions are usually due to small details. Before calling the
Technical Assistance Service, you should consider the
following advice and warnings.
Indicator
Malfunction
none
The electric power supply has been cut off. Use other electrical appliances to check whether there has been a
The appliance has not been correctly
connected following the connection
diagram.
Electronic system malfunction.
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.
10
symbol and hold for
0
on the right.
‹
Solution
power cut.
Check that the appliance has been connected correctly according to
the connection diagram.
If in the above checks, the malfunction is not resolved, contact the
Technical Assistance Service.
Press the
0
symbol several times until the indicator for the
3.
desired function appears on the left of the screen.
Then select the desired setting in the programming panel.
4.
Press the
0
symbol again and hold for more than
5.
4 seconds.
The settings will have been correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■