Siemens EH9..SZ... Instruction Manual - Page 12
Browse online or download pdf Instruction Manual for Hob Siemens EH9..SZ.... Siemens EH9..SZ... 16 pages.
Indicator
Function
™‡
Duration of the time program function warning signal
10 seconds*.
‚
30 seconds.
ƒ
„
1 minute.
Power-Management function
™ˆ
= Deactivated.*
‹
= 1,000 W. minimum power.
‚
= 1,500 W.
‚
= 2,000 W.
ƒ
etc.
Š
or
Š
. = maximum power of the hob.
™‹
Return to basic settings
‹
Personal settings.*
Return to factory settings.
‚
*Factory settings
Accessing the basic settings
The hob should be turned off.
Switch on the hob.
1.
Within the next 10 seconds, press and hold the
2.
4 seconds.
and
light up on the display as the default setting.
™‚
‹
Press the
0
symbol several times until the desired function
3.
indicator appears.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
■
12
Then select the desired setting with the programming zone.
4.
0
symbol for
Press and hold the
5.
4 seconds.
The settings should be correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
symbol again for more than
0