Epson BrightLink 595Wi+ Start Here Manual - Page 3
Browse online or download pdf Start Here Manual for Projector Epson BrightLink 595Wi+. Epson BrightLink 595Wi+ 6 pages.
Print Page
2
Calibrate
Calibration coordinates the position of the pen or your
finger with the location of your cursor. If the pen or
finger position and cursor location don't match, you can
perform auto calibration, or you can calibrate manually
for even greater accuracy. You don't need a computer,
and you won't need to calibrate again unless the
projector or image is moved, or the image is resized.
Pen Calibration
1
To start pen calibration, press the User button on
the remote control.
2
When you see the Auto Calibration screen, do one
of the following:
•
Press
to run auto calibration, then wait until
calibration is complete.
•
Select No, then press
below to calibrate manually.
3
Select Manual Calibration, then press
4
When you see the Manual Calibration screen, press
to select Yes.
5
Touch the circles on the screen with your pen to
perform manual calibration.
and follow the steps
.
Finger Touch Calibration
1
To start finger touch calibration, press the User
button on the remote control.
2
When you see the Auto Calibration screen, do one
of the following:
•
Press
to run auto calibration, then wait until
calibration is complete.
•
Select No, then press
below to calibrate manually.
3
Select Touch Unit Setup, then press
4
Select Installation Pattern and press
the on-screen instructions.
5
Select Touch Calibration, then press
6
When you see the Touch Calibration screen, press
to select Yes.
A green circle appears in the upper left corner of
your projected image.
7
Touch and hold the center of the circle with your
finger until the circle disappears and another one
appears.
Note: Make sure you touch the center of each
circle; otherwise the calibration may not be
accurate.
8
Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User's Guide.
and follow the steps
.
. Follow
.