Epson CPD-17904 User Manual - Page 29

Browse online or download pdf User Manual for Projector Epson CPD-17904. Epson CPD-17904 48 pages. Epson powerlite home 10 projector cpd-17904

Print Page

5. Use a small screwdriver to loosen the two silver screws holding the lamp in place. (You

can't remove these screws.)

6. Grasp the lamp as shown and pull it straight out.

7. Gently insert the new lamp and tighten its screws.

Caution: Don't touch the glass portion of the lamp assembly. Touching the glass could

result in premature lamp failure.

8. To replace the lamp cover, insert the tabs and then snap the cover into place. (The

projector won't work if the lamp cover is loose.)

After replacing the lamp, you need to reset the lamp timer, as described in the next section.