Digital Juice Standard Follow Focus Getting Started Manual

Browse online or download pdf Getting Started Manual for Camera Accessories Digital Juice Standard Follow Focus. Digital Juice Standard Follow Focus 2 pages.

Print Page

Getting Started Guide

Using the Standard Follow Focus

Mounting the Standard Follow Focus to your Camera Rig:

Before attaching the Standard Follow Focus unit to your rig, you should first

mount your lens gear belt around the focus wheel on your lens. To do so,

loosen the thumbscrew on the lens gear belt until the teeth

of the gear slide through the clasp (5). Next, slide the belt

around the focus wheel on your lens, pull it snug and then

tighten the thumbscrew (6).

Once the lens gear belt is attached, you can mount the

Standard Follow Focus to your rig. To do this, loosen the blue

knob on the bottom of the follow focus assembly (7). This

will loosen the holes for the 15mm rods to slide into and it

will allow the unit to slide along the rod mount assembly (8).

Slide the follow focus onto the rails of your rig until the gear

on the follow focus assembly is lined up with the lens gear

belt on your camera lens. Adjust positioning until the teeth

on the camera lens gear belt and the follow focus lens gear

mesh together perfectly. Do not press the gears together too

tightly as you will damage your equipment or the follow focus

unit. When the teeth are properly aligned, tighten the blue

knob on the bottom of the follow focus assembly to secure

the follow focus on the rails and lock the positioning (9).

The

Focus

any DSLR camera setup, allowing

for quick and accurate focusing with

minimal lens shake. It mounts to

industry standard 15mm rails and

is compatible with a wide variety of

lenses, cameras, and shoulder rigs.

The Standard Follow Focus has

a switchable lens gear

accommodate long and short

lenses. It comes with one lens gear

belt

China Wheel

repeatable, accurate focus pulls.

Adjusting and mounting the Standard

Follow Focus is easy, using the single

knob located at the bottom of the unit

(4)

path of the rails to assure the perfect

distance of the drive gear from the

camera lens barrel.

Digital Juice Standard Follow

is an essential accessory for

(1)

(2)

and has a wet erase type

(3)

so that you can get

to adjust its position along the

(continued on reverse >)