Cisco 7962G - Unified IP Phone VoIP Quick Reference Manual - Page 2

Browse online or download pdf Quick Reference Manual for IP Phone Cisco 7962G - Unified IP Phone VoIP. Cisco 7962G - Unified IP Phone VoIP 2 pages. Unified communications manager 9.0 (sccp and sip)
Also for Cisco 7962G - Unified IP Phone VoIP: User Manual (23 pages), Datasheet (5 pages), User Manual (6 pages), User Manual (4 pages), Specifications (5 pages), Administration Manual (12 pages), User Manual (13 pages), User Manual (12 pages), User Manual (6 pages), Administration Manual (16 pages), Troubleshooting And Maintenance (27 pages)

Print Page
Cisco 7962G - Unified IP Phone VoIP Quick Reference Manual
VOICE MAIL SERVICES
Initial Set Up
•Press the Message button.
•Enter a password. (Default password is 88003#)
•Please follow system instructions for the following:
• Record your name. • Set a new password.
• Record your greeting.
•Please wait until you hear "You Have Finished
Enrollment" then hang up.
To Check Messages from your telephone:
•Press the Message button and log on.
•New messages will start to play.
•Follow prompts to manage individual messages.
To Check Messages from outside the office:
•On-Campus Dial 6-9999
Off-Campus Dial 575-646-9999
*
•When the greeting begins to play, press
•Enter last 5 digits of your extension number (id), press #
•Enter your pin then press #
•Follow prompts to listen and manage your messages
To Change Your Recorded Name:
•Press the Message button and log on.
•When greeting starts, Press 4 >3 >2.
*
•At the tone, record your name, or press
to keep the current recording.
To Change Your Password:
•Press the Message button and log on.
•Press 4 >3 >1.
•Enter new password and press #. Enter new password
again to confirm then press #.
To Record a Greeting:
•Press the Message button and log on.
•Press 4 > 1 > 1.
•After your current greeting, press 1 to rerecord new
greeting
•Press #
•Follow prompts
To Enable or Disable a Greeting:
(You can enable or disable only your alternate greeting by
phone.)
•Press the Message button and log on.
•Press 4 >1 >1.
•After your current greeting, press 2 to enable or disable
your alternate greeting.
Note: When your alternate greeting is enabled, it overrides all
other greetings.
To Reply to a Message:
•After listening to the message, press 4. Record your reply.
•Press # to send the reply, or press 1 for message options.
Message Options are the same as above.
•Follow the prompts to handle the original message.
To Forward a Message:
•After listening to the message, press 5.
•Follow prompts to address the forwarded message.
•Press # to forward the message as is, or press 2 to record
an introduction, or press 3 for message options.
•Press # to forward the message as is, or press 1 for
message options.