Epson DuoLink Setup Manual - Page 27

Browse online or download pdf Setup Manual for Projector Epson DuoLink. Epson DuoLink 43 pages.

Print Page

Pen Calibration

Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate

the first time you use your projector's interactive features. Calibration results remain until you calibrate

again.

Be sure to calibrate the pen before performing finger touch calibration.

If you notice positioning discrepancies after doing any of the following, calibrate again:

• Performing Geometry Correction

• Adjusting the image size

• Using the Image Shift feature

• Moving the projector

Note: When using multiple projectors with DuoLink, draw a line across the two screens after pen

calibration and make sure the screens are aligned correctly. If the line position does not match, realign

the screens and perform calibration again.

Note: Move any pen you are not using away from the projection screen while calibrating.

Calibrating Manually

Parent topic:

Calibrating Automatically

You do not need the pens or a computer for Auto Calibration. Make sure the other projector is turned off

during calibration.

Make sure you have aligned the screens before starting calibration.

Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing

the Menu button on the remote control as described here.

Configuring Projector Settings for Multiple Projectors