Cisco 7970G - IP Phone VoIP User Manual - Page 7
Browse online or download pdf User Manual for IP Phone Cisco 7970G - IP Phone VoIP. Cisco 7970G - IP Phone VoIP 21 pages. Unified ip phones
Also for Cisco 7970G - IP Phone VoIP: Preparing To Install (17 pages), Installation Manual (19 pages), Troubleshooting And Maintenance (25 pages)
Print Page
Line and Call Icons
The difference between lines and calls is as follows:
• Lines—Each corresponds to a directory number that others can use to call you. Your phone can support up to eight lines.
To see your phone lines, look at the right side of your touch screen. You have as many lines as you have directory numbers
and phone line icons:
• Calls—Each line can support multiple calls. By default, your phone supports two connected calls per line. Only one call can
be active at any time; other calls are automatically placed on hold.
Your phone displays icons to indicate the line and call state.
Icon
Line or call state
On-hook line
Off-hook line
Connected call
Ringing call
Call on hold
Remote-in-use
Authenticated call
Encrypted call
Idle line (BLF)
Busy line (BLF)
2
Operating Your Phone
You can perform basic call-handling tasks using a range of features and services. Feature availability can vary; see your system
administrator for more information.
The following procedures may require you to enter information using the keypad. Press the backspace (<<) soft key to
Note
erase digits that were entered incorrectly.
Placing a Call—Basic Options
To place a call using the handset, pick up the handset and enter a number.
To place a call using the speakerphone, press
To place a call using a headset, press
To redial a number, press Redial to dial the last number, or press the Navigation button (with the phone idle) to see your Placed
Calls.
To place a call while another call is active (using the same line), use the following procedure:
1. Press Hold.
2. Press New Call.
3. Enter a number.
To dial from a call log, use the following procedure:
1. Choose
> Missed Calls, Received Calls, or Placed Calls.
.
Description
No call activity on this line.
You are dialing a number or an outgoing call is ringing.
You are connected to the other party.
A call is ringing on one of your lines.
You have put the call on hold.
Another phone that shares your line has a connected call.
See the "Making and Receiving Secure Calls" section on page 15.
See the "Making and Receiving Secure Calls" section on page 15.
See the "Using BLF to Determine a Line State" section on page 15.
See the "Using BLF to Determine a Line State" section on page 15.
and enter a number.
and enter a number. Or, if
is lit, press New Call and enter a number.
7