Epson EasyMP Network Projection Operation Manual - Page 17

Browse online or download pdf Operation Manual for Projector Epson EasyMP Network Projection. Epson EasyMP Network Projection 50 pages. Multimedia projector
Also for Epson EasyMP Network Projection: Operation Manual (47 pages), Update Instructions (4 pages), Operation Manual (50 pages), Operation Manual (50 pages), Operation Manual (47 pages), Operation Manual (40 pages), Operation Manual (48 pages), Operation Manual (47 pages)

Print Page

Connecting to a Projector on a Different Subnet

You can connect the projector and the computer and project to screens

at remote locations (on different subnets).

In Automatic search, projectors on different subnets are not found

because searches are only performed on the same subnet.

You can use the following methods to connect to a projector on a

different subnet.

• Specify either an IP address or projector name and perform a search.

The IP address can be input directly. Also, provided the projector name

to be connected has been registered on the DNS server, you can

perform a search simply by inputting that projector name.

s "Specifying Either an IP Address or Projector Name and

Performing a Search (Advanced Connection Mode Only)"

• Perform a search based on a Profile.

Once you have performed a search for a projector on a different subnet

by specifying either an IP address or a projector name, you can save the

search as a profile with an easy-to-remember name, and then use that

profile whenever you subsequently want to search for a projector on a

different subnet.

s "Performing a Search with a Profile"

• If you cannot find a projector, see the following section for the most likely

causes.

s "Troubleshooting"

p.40

• When you use Manual search in Quick Connection Mode, you can specify

the SSID to narrow the search field.

p.17

p.18

Specifying Either an IP Address or Projector Name

and Performing a Search (Advanced Connection

Mode Only)

In the following explanations, unless otherwise noted, Windows screen

shots are used.

Similar screens are displayed on Mac OS.

Click Manual search on the EasyMP Network Projection

projector selection screen.