Monitoring window layout
Internal temperature
normal
High-temperature
warning
Internal temperature
error
G
Error information
Shows a notification or warning/problem status using the following icons.
Clean Air Filter Notice
Replace Lamp (Lamp 1)
Lamp error (Lamp 1)
Lamp failure at power on
(Lamp 1)
High-temperature warning
No Air Filter
Air Flow Sensor Err.
Supply System Error (Ballast
2)
Shutter warning
Lamp Error
Lamp Error (Lamp 2)
Lamp failure at power on
(Lamp 1)
High internal temperature er-
ror
Air filter air flow sensor error
Fan error
Internal temperature
normal
High-temperature
warning
*4
Replace Lamp
Replace Lamp (Lamp 2)
Lamp error (Lamp 2)
Lamp failure at power on
(Lamp 2)
Replace Air Filter
Low Air Flow
Supply System Error (Ballast
1)
Cinema filter warning
Lamp Cover Open
Lamp Error (Lamp 1)
Lamp failure at power on
Lamp failure at power on
(Lamp 2)
Low air flow error
Internal Error
Sensor error
Supply System Error (Ballast)
Supply System Error (Ballast
2)
Cinema filter error
Cooling system error (Peltier
element)
Other error
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default
setting is Off.
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to On or Standby Mode is set to
Network On in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
*4 You can display Replace Lamp at any time preset at Environment setup in
the Tool menu.
• The projector information that is generated when a problem is
q
detected is stored until EasyMP Monitor is closed. EasyMP
Monitor displays will not be updated automatically even if the
projector status returns to normal. Click "Refresh" in the main
window to update the status.
• Detectable error information differs with the projector you are
using.
Selecting display items
You can select only the required items to be displayed in Detail list
view.
22
Supply System Error (Ballast
1)
Auto Iris Error
Shutter error
Cooling system error (pump)
Print Page