Cisco 8800 Series Manual - Page 2

Browse online or download pdf Manual for IP Phone Cisco 8800 Series. Cisco 8800 Series 4 pages. Hosted enterprise uc ip phone
Also for Cisco 8800 Series: Hardware Installation Manual (25 pages), User Manual (4 pages), Quick Start (2 pages), Manual (10 pages), Quick Start Manual (3 pages), Quick Start Manual (2 pages), Start Manual (2 pages), User Manual (24 pages), Quick Reference (2 pages), User Manual (28 pages), Quick Start Manual (3 pages), Firmware Migration Master Manual (31 pages), User Manual (2 pages), User Manual (30 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Manual (44 pages), Manual (13 pages), Manual (14 pages), Manual (4 pages), Get Started (6 pages), Quick Start Manual (19 pages), Maintenance Manual (6 pages), Quick Start (2 pages), Quick User Manual (2 pages), End User Manual (6 pages), Quick Start Manual (2 pages), Trouble Shoot (4 pages), Quick Reference Manual (7 pages), Quick Start Manual (2 pages), Manual (22 pages), Manual (22 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Manual (48 pages), User Manual (40 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page

Adjust the Handset Rest

Step 3

(Optional) Adjust the footstand on the key expansion module and ensure that the phone and key expansion

module are stable.

Step 4

(Optional) Press Self-view to check the camera angle.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the

handset rest to ensure that the receiver does not slip out of the cradle.

Figure 1: Adjust the Handset Rest

Procedure

Step 1

Remove the handset from the cradle and pull the plastic tab from the handset rest.

Step 2

Rotate the tab 180 degrees.

Step 3

Hold the tab between two fingers, with the corner notches facing you.

Step 4

Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from

the top of the rotated tab.

Step 5

Return the handset to the handset rest.

Secure the Phone with a Cable Lock (8800 Series)

You can secure your Cisco IP Phone 8800 Series with a laptop cable lock up to 20 mm wide.

Adjust Your Phone on Your Desk