Cisco 8800 Series Manual - Page 3

Browse online or download pdf Manual for IP Phone Cisco 8800 Series. Cisco 8800 Series 48 pages. Hosted enterprise uc ip phone
Also for Cisco 8800 Series: Hardware Installation Manual (25 pages), User Manual (4 pages), Quick Start (2 pages), Manual (10 pages), Quick Start Manual (3 pages), Quick Start Manual (2 pages), Start Manual (2 pages), User Manual (24 pages), Quick Reference (2 pages), User Manual (28 pages), Quick Start Manual (3 pages), Firmware Migration Master Manual (31 pages), User Manual (2 pages), User Manual (30 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Manual (44 pages), Manual (13 pages), Manual (14 pages), Manual (4 pages), Manual (4 pages), Get Started (6 pages), Quick Start Manual (19 pages), Maintenance Manual (6 pages), Quick Start (2 pages), Quick User Manual (2 pages), End User Manual (6 pages), Quick Start Manual (2 pages), Trouble Shoot (4 pages), Quick Reference Manual (7 pages), Quick Start Manual (2 pages), Manual (22 pages), Manual (22 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), User Manual (40 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page

Cisco IP Phone Accessories

Note

Connect the Footstand

If your phone is placed on a table or desk, connect the footstand to the back of the phone.

Procedure

Step 1

Insert the connectors into the slots.

Step 2

Press the footstand until the connectors snap into place.

Step 3

Adjust the angle of the phone.

Secure the Phone with a Cable Lock

You can secure your phone with a laptop cable lock up to 20 mm wide.

Procedure

Step 1

Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.

Step 2

Pass the lock through the looped end of the cable.

Step 3

Unlock the cable lock.

Step 4

Press and hold the locking button to align the locking teeth.

Step 5

Insert the cable lock into the lock slot of your phone and release the locking button.

Step 6

Lock the cable lock.

1. If you connect your headset to the phone with the Y-cable (RJ-9 connector and AUX connector) , make

sure that you enable Electronic HookSwitch Control in the Audio Volume area from Voice > User tab

on the phone administration web page.

2. When you use the Electronic Hookswitch (EHS):

• The EHS connects to the Cisco IP Phone 8811, 8841, and 8845 with the auxiliary port.

• The EHS connects to the Cisco IP Phone 8851, 8861, and 8865 with the auxiliary port, the USB port,

or with Bluetooth.

Connect the Footstand

Cisco IP Phone Accessories