Cisco 8800 Series Manual - Page 42

Browse online or download pdf Manual for IP Phone Cisco 8800 Series. Cisco 8800 Series 48 pages. Hosted enterprise uc ip phone
Also for Cisco 8800 Series: Hardware Installation Manual (25 pages), User Manual (4 pages), Quick Start (2 pages), Manual (10 pages), Quick Start Manual (3 pages), Quick Start Manual (2 pages), Start Manual (2 pages), User Manual (24 pages), Quick Reference (2 pages), User Manual (28 pages), Quick Start Manual (3 pages), Firmware Migration Master Manual (31 pages), User Manual (2 pages), User Manual (30 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Manual (44 pages), Manual (13 pages), Manual (14 pages), Manual (4 pages), Manual (4 pages), Get Started (6 pages), Quick Start Manual (19 pages), Maintenance Manual (6 pages), Quick Start (2 pages), Quick User Manual (2 pages), End User Manual (6 pages), Quick Start Manual (2 pages), Trouble Shoot (4 pages), Quick Reference Manual (7 pages), Quick Start Manual (2 pages), Manual (22 pages), Manual (22 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), User Manual (40 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page

Cisco IP Phone Accessories

• #1 and #2 Phillips-head screwdrivers

• Level

• Pencil

You must also install an Ethernet jack for the telephone in the desired location if an Ethernet jack does not

currently exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a regular

telephone jack.

Procedure

Step 1

Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you can

run the Ethernet network cable to a nearby jack.

Note

a) Hold the bracket on the wall. See the following figure for the orientation of the wall bracket.

b) Use the level to ensure that the bracket is level and use a pencil to mark the screw holes.

c) Using a #2 Phillips-head screwdriver, carefully center the anchor over the pencil mark and press the anchor

into the wall.

d) Screw the anchor clockwise into the wall until it is seated flush.

e) Use the included screws and a #2 Phillips-head screwdriver to attach the bracket to the wall.

Cisco IP Phone Accessories

If the jack is to be placed behind the phone, the Ethernet jack must be flush to the wall or recessed.

Cisco IP Phone Accessories