Cisco 8832 Quick Start - Page 2

Browse online or download pdf Quick Start for IP Phone Cisco 8832. Cisco 8832 2 pages. Masergy ip conference phone
Also for Cisco 8832: Firmware Migration Master Manual (31 pages), User Manual (20 pages), Quick Start Manual (2 pages), Manual (30 pages), Installation Manual (39 pages), Quick Start Manual (16 pages), Maintenance Manual (9 pages), Quick Start (2 pages), Settings (14 pages), Quick Start Manual (2 pages), Reconfiguration Manual (2 pages), Manual (30 pages)

Print Page

Transfer a Call to Another Person

1. From a call that is not on hold, press Transfer.

2. Enter the other person's phone number.

3. (Optional) Wait until you hear ringing or until the other

person answers the call.

4. Press Transfer again.

Mute Your Call

1. Press Mute

on the phone or

Mute

on the extension microphone.

2. Press Mute again to turn mute off.

Listen to Voice Messages

Press Messages and follow the voice prompts.

Forward All Calls

1. Press Forward all.

2. Input the destination number for forwarding.

3. When you return, press Forward off.

Adjust the Volume in a Call

Press Volume

up or down to adjust the volume

when the phone is in use.

Adjust the Ringer Volume

Press Volume

up or down to adjust the ringer

volume when the phone is not in use.

Cisco 8832 IP Conference Phone

Change the Ringtone

1. Select button on navigation bar > User

Preference > Ringtones press select button to

choose a Ringtone option.

2. Scroll through the list of ringtones and press Play to

hear a sample.

3. Press the Select button on the navigation bar to Save.

Change the Backlight Timer

1. Select button on navigation bar > User

Preference > Screen Preferences > Backlight Timer.

2. Press the navigation bar Select button

to change from Always On, 1m, 5m, or 30m

duration.

3. Press the Select button on the navigation bar to Save.

Note: The Cisco 8832 IP Conference Phone

requires the Cisco IP Conference Phone 8832

PoE Injector includes a USB-C cable. The USB-

C cable connects to the Cisco 8832 IP

Conference Phone and provides the RJ45 port.

(CP-8832-POE Injector)

For the non-PoE Ethernet deployment, the

Cisco 8832 IP Conference Phone requires

the Cisco IP Conference Phone non-PoE

ETH injector. This adapter includes a USB-C

cable for connection to the Cisco IP

Conference Phone, an RJ45 port, and AC

power connection.

(CP-8832-ETH non-POE Injector)

For further information on other Masergy

supported telephones please visit the

Masergy IP Phones

webpage.

Quick Start