Cisco 8945 Administration Manual - Page 8

Browse online or download pdf Administration Manual for IP Phone Cisco 8945. Cisco 8945 16 pages. Unified ip standard phone
Also for Cisco 8945: Datasheet (5 pages), User Manual (42 pages), Release Notes (16 pages), User Manual (24 pages), Quick Start (2 pages), Quick Start Manual (4 pages), User Manual (2 pages), Quick Start Manual (2 pages), User Manual (8 pages), User Manual (2 pages), Quick Reference Manual (5 pages), Quick Reference (2 pages), User Manual (2 pages), User Manual (3 pages), Training Manual (31 pages), Features Manual (4 pages), Quick Glance (3 pages), Reference Manual (28 pages), User Manual (20 pages), Getting Started (29 pages)

Print Page
Cisco 8945 Administration Manual
Configure Network Settings
Option
PC Port Setup
LLDP-MED: Switch
Port
Procedure
Step 1
Press Applications.
Step 2
To access the Network Settings menu, select Administrator Settings > Network Settings.
Related Topics
Text Menu Entry from Phone, on page 5
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
8
Description
Speed and duplex of the access port. Valid
values:
• Auto Negotiate
• 1000 Full: 1000-BaseT/full duplex
• 100 Half: 100-BaseT/half duplex
• 100 Full: 100-BaseT/full duplex
• 10 Half: 10-BaseT/half duplex
• 10 Full: 10-BaseT/full duplex
If the phone is connected to a switch,
configure the port on the switch to the same
speed/duplex as the phone, or configure
both to autonegotiate.
If you change the setting of this option, you
must change the SW Port Configuration
option to the same setting.
Enables and disables Link Layer Discovery
Protocol Media Endpoint Discovery
(LLDP-MED) on the switch port. Use this
setting to force the phone to use a specific
discovery protocol, which should match the
protocol supported by the switch. Settings
include:
• Enabled (default)
• Disabled
Cisco Unified IP Phone Installation
To change
Set PC Port Setup Field, on page 11
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.