Digital Lumens RLE Installation Instructions Manual - Page 7
Browse online or download pdf Installation Instructions Manual for Lantern Digital Lumens RLE. Digital Lumens RLE 20 pages. Intelligent led high-bay luminaire
Also for Digital Lumens RLE: Installation Instructions Manual (20 pages)
Print Page
RLE
APPENDIX B
Installing a Sensor Mask
Masked Sensor Optic
APPENDIX C
Control Module Field Replacement
Sensor Optic
RLE Installation Instructions
Sensor Mask Decals
Sensor Optic
Sensor Tabs
Control Module
For luminaires with NARROW optics only.
Determine Sensor Mask Orientation
The sensor mask decals must align with the short edge of the
luminaire.
Apply Sensor Mask to Optic
One at a time, remove the adhesive backing. Carefully, place
each mask decals along either side of the sensor optic, as
shown to the left. Do not cover any other part of the optic.
Remove Existing Control Module
Disconnect power from the luminaire.
Use the tabs on the control module to rotate it 1/8-turn
counter-clockwise, and then extract the module from the
luminaire housing.
Install Replacement Control Module
Insert the replacement module and rotate it 1/8-turn
clockwise while lightly pushing down, until there is an
audible 'click'.
Restore power to the luminaire.
Note:
To ensure network connectivity following module
replacement, update the facility map file using Digital
Lumens commissioning software.
ENGLISH
7