Cisco Catalyst 4000 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for IP Phone Cisco Catalyst 4000. Cisco Catalyst 4000 8 pages. For cisco business edition 4000
Also for Cisco Catalyst 4000: Manual (18 pages), Preparing To Install (11 pages), Getting Started Manual (31 pages), End User Manual (6 pages), End User Manual (6 pages)

Print Page

Cisco Business Edition 4000

Install the BE4000

Step 1.

Unpack the BE4000 and locate the QR code (17) on the underside of the

product.

Step 2.

Use a QR scanner application to scan the QR code and launch the

BE4000 portal. If you don't have a QR scanner, browse to the BE4000

portal - https://be4000.cisco.com/deploy.

Step 3.

Enter the serial number (16) if prompted, and select your customer-site

configuration.

Step 4.

Connect the BE4000 to the network services as described in the portal.

Step 5.

We recommend that you install the BE4000 in a 19-inch rack. You can

also wall mount or place the BE4000 on any secure flat surface, if

preferred.

Step 6.

If you are installing in a rack, use the illustration (14) inside the front cover

as a guide to attach the mounting brackets with the screws provided. Use

suitable fastenings to secure the product in place.

Step 7.

Connect the power supply to the BE4000 (7) and the mains supply, then

switch on (6). You can track the progress of your BE4000 activation in the

portal.

Where to Go from Here

After successfully installing the BE4000, you can configure and

monitor services through the portal:

Cisco Technical Assistance Center.

Cisco BE4000 Product Information.

Warranty Information.

https://be4000.cisco.com