Cisco Cisco 7940 Installation And Configuration Manual - Page 2

Browse online or download pdf Installation And Configuration Manual for IP Phone Cisco Cisco 7940. Cisco Cisco 7940 10 pages. 2 line appearance phone
Also for Cisco Cisco 7940: User Manual (19 pages), User Manual (13 pages), User Manual (12 pages), Customized User Manual (2 pages), Manual (35 pages), User Manual (15 pages), User Manual (23 pages), User Manual (14 pages), Reference Manual (2 pages), Quick Reference Manual (2 pages), User Manual (13 pages), User Manual (16 pages), User Manual (9 pages), Reference Manual (4 pages), Quick Reference Manual (8 pages), Quick Start Manual (12 pages), Quick Reference Manual (12 pages), User Manual (20 pages), User Manual (14 pages), Quick Reference Manual (12 pages), User Manual (6 pages), Reference Manual (17 pages), User Manual (3 pages), Quick User Manual (2 pages), Quick Installation Manual (1 pages), Manual (21 pages), User Manual (3 pages), Quick Reference (2 pages), Quick Start Manual (2 pages), Quick Reference Manual (2 pages), Reference Manual (3 pages), User Manual (12 pages), User Manual (12 pages), User Manual (4 pages), Quick User Manual (2 pages)

Print Page

Installing the Configuration Files

Included with this technical note is a folder containing configuration files and templates used by the UC

server to automatically detect and provision Cisco 79x0 Series telephones. This folder must be copied into

the UC server folder tree (along with the Cisco SIP firmware files as outlined above in

Firmware Upgrades on page

To install the configuration files:

1. Extract the Cisco folder from the .zip file titled Cisco (7940, 7960) Installation and Configuration

(P0S3-08-9-00) (located in the same directory as this document) and copy it under the

PhoneTypes folder located here:

X:\Program Files\ADTRAN\NetVanta UC Server\Data\System\PhoneTypes, where X is the

drive where the UC server program files are installed.

For example, the resultant path after the folder is copied (henceforth known as the Cisco

PhoneTypes folder) might appear as follows:

C:\Program Files\ADTRAN\NetVanta UC Server\Data\System\PhoneTypes\Cisco

2. Copy the Cisco SIP firmware files (as outlined in

the Cisco PhoneTypes folder.

CAUTION: Cisco phones will not automatically upgrade to the correct version if the firmware files

are not copied into the above folder. Failing to upgrade the phones to the correct version may result

in unexpected behavior and/or a loss of functionality.

3. Restart the NetVanta UC Server Application Service.

Select Start > Control Panel > Administrative Tools > Services.

Scroll down and select NetVanta UC Server Application Services.

Right-click the entry and select Restart.

1).

Obtaining Firmware Upgrades on page

Obtaining

1) into