Cisco Cisco Access Registrar 4.2 Configuring Network Settings - Page 20
Browse online or download pdf Configuring Network Settings for IP Phone Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 pages. Telepresence conference system
Also for Cisco Cisco Access Registrar 4.2: User Manual (44 pages), Getting Started Manual (46 pages)
Print Page
Configuring IP Settings
Using the Phone Configuration Web Page
Step 1
Step 2
Step 3
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-20
To assign a default router for the Cisco Unified IP Phone, follow these steps:
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To set the route address, enter an address in the StaticRoute field and click Apply.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to Default Router.
Press the Edit softkey.
Enter the new IP address.
For information about entering values, see the
the Network Configuration Menu" section on page
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Accessing Network Settings through a Phone
4-2.
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
"Guidelines for Editing Settings in
4-6.
OL-8617-01