Cisco Cisco Headset 562 Manual - Page 28

Browse online or download pdf Manual for IP Phone Cisco Cisco Headset 562. Cisco Cisco Headset 562 40 pages. Ip phones with multiplatform firmware
Also for Cisco Cisco Headset 562: Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (3 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), User Manual (46 pages), Administration Manual (48 pages), Installation Manual (39 pages), Manual (24 pages), Quick Reference Manual (7 pages)

Print Page

Connect the Multibase to a Bluetooth Device

The Cisco Headset 560 Series Multibase can connect to Bluetooth devices such as a mobile phone or tablet.

The headset base appears on your call device as Cisco Headset followed by the last three digits on your

headset serial number.

Note

You can find your headset serial number in the lower right corner on the underside of your base.

The multibase can store up to four different paired Bluetooth devices. If you already have four paired devices,

the base will replace the device which has not been used in the longest time.

Procedure

Step 1

Press the Bluetooth button on the back of the multibase twice to start pairing.

Step 2

Select your headset from the Settings menu on your device.

The Bluetooth LED lights white when pairing is successful.

Disconnect the Multibase from a Bluetooth Device

You can disconnect your Multibase from its paired Bluetooth call device.

Procedure

Step 1

Press the Bluetooth button on the back of the base once. The LED may take a moment to turn off.

Step 2

Press the Bluetooth button again to reconnect to the same call device.

Erase All Bluetooth Pairings

You can erase all saved Bluetooth device pairings.

Procedure

Press and hold the Bluetooth button on the back of the multibase for four seconds to clear the memory.

Headsets