Cisco CP-7942G-CCME Datasheet - Page 3

Browse online or download pdf Datasheet for IP Phone Cisco CP-7942G-CCME. Cisco CP-7942G-CCME 5 pages. Cisco unified ip phone

Print Page

Speakerphone, Mute,

and Headset Buttons

Ethernet Switch

Headset Port

Volume Control

Adjustable Foot-Stand

Multiple Ring Tones

Americans with Disabilities

Act (ADA) Features

Quality of Service

(QoS) Options

Security

Language Support

Configuration Options

Table 2.

Cisco Unified IP Phone 7942G Product Specifications

Specification

Dimensions (H x W x D)

Weight

Phone-Casing Composition

Power

Phone Software Requirements Supported in 8.3(2) and greater

Call Control Compatibility

Signaling Protocols

Table 3.

Temperature Ratings

Temperature Variable

Operating Temperature

Relative Humidity

Storage Temperature

Certifications—Compliance and Safety

Refer to the following link:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/iphrcsi3.html.

Speakerphone includes Speaker On/Off, Microphone Mute, and Headset buttons that are lit

when active. For added security, the audible dual tone multifrequency (DTMF) tones are

masked when the speakerphone mode is used.

Internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100BASE-T

Ethernet network through an RJ-45 interface with single LAN connectivity for both the phone

and a colocated PC. System administrator can designate separate VLANs (802.1Q) for the

PC and phone, providing improved security and reliability of voice and data traffic.

Dedicated headset port eliminates the need for a separate headset amplifier and allows the

handset to remain in its cradle, making headset use simpler. Both wideband (G.722) and

narrowband headsets are supported.

Provides easy decibel-level adjustments for the speakerphone, handset, headset, and

ringer. The handset is hearing aid-compatible. Additional volume control gain can be

achieved using an inline handset amplifier.

Stand is adjustable from flat to 60 degrees to provide optimum display viewing and

comfortable use of all buttons and keys. The foot-stand is keyed to match standard wall-jack

configurations for wall mounting. Optional wall-mount brackets are also offered.

More than 24 defined user-selectable ring tones are available. Ring tones may also be

personalized through use of the Cisco Unified Phone Application Suite.

Handset is hearing aid-compatible and meets Federal Communications Commission (FCC)

loudness requirements for the Americans with Disabilities Act (ADA). Section 508 loudness

requirements can be achieved using industry-standard inline handset amplifiers such as

Walker Equipment W-10 or CE-100 amplifiers. Dial pad is also ADA-compliant.

Supports differentiated services code point (DSCP) and 802.1Q/p standards.

Positive device identity through X.509v3 Certificates, digitally signed images,

cryptographically secure provisioning, and secure signaling and secure media with AES-

128. The phone also contains an 802.1X supplicant, and supports EAPOL pass-through.

Built-in support for more than 30 languages (dependent on Cisco Unified Communications

Manager version).

IP address assignment can be statically configured or configured through the DHCP client.

Description

8.2 x 10.5 x 6 in. (20.32 x 26.67 x 15.24 cm)

3.5 lb (1.6 kg)

Acrylonitrile butadiene styrene (ABS) plastic in textured dark gray color with silver bezel

Supports IEEE 802.3af PoE (Class 2). Also supports Cisco Prestandard Power over

Ethernet (PoE), allowing powering from any of the Cisco Inline Power-capable blades and

boxes, plus Cisco midspan. 48VDC is required; it can be supplied locally at the desktop

using an optional AC-to-DC power supply (part number CP-PWR-CUBE-3=) or power

injector (CP-PWR-INJ=). Local power options require a corresponding AC country cord (see

Table 6).

Supported in Cisco Unified Communications Manager Versions 4.1(3)sr5b, 4.2(3)sr2b,

4.3(1), 5.1.1(b), 5.1(2), 6.0(1) and greater

Supported in Cisco Unified Communications Express and SRST Version 4.1

Skinny Client Control Protocol (SCCP) and Session Initiation Protocol (SIP) with Cisco call

control

Description

32 to 104° F (0 to 40° C)

10 to 95% (noncondensing)

14 to 140° F (–10 to 60° C)

Data Sheet

Page 3 of 5