Cisco M5 Hardware Installation Manual - Page 14
Browse online or download pdf Hardware Installation Manual for IP Phone Cisco M5. Cisco M5 42 pages.
Also for Cisco M5: Basic User's Manual (12 pages), Maintenance Manual (6 pages)
Print Page
Power Supply
5
Power Supply
The following table lists the specifications for each 770-W AC power supply (Cisco part number
FMC-PWR-AC-770W) used in the Threat Grid M5.
Table 2: Power Supply Specifications
Description
Power consumption
AC input voltage range
AC input frequency
Maximum AC input current
Maximum input volt amperes
Maximum output power for each power supply
Maximum inrush current
Maximum hold-up time
Power supply output voltage
Power supply standby voltage
Efficiency rating
Cisco Threat Grid M5 Hardware Installation Guide
10
Rear unit identification:
• Off—The unit identification function is not
in use.
• Blue, flashing—The unit identification
function is activated.
6
Power supply (one LED for each power supply):
• Off—No AC input (12-V main power off;
12-V standby power off)
• Green, flashing—12-V main power off; 12-V
standby power on.
• Green—12-V main power on; 12-V standby
power on.
• Amber, flashing—Warning threshold
detected but 12-V main power on.
• Amber—Critical error detected; 12-V main
power off (for example, overcurrent,
overvoltage, or overtemperature failure).
Specification
1313 BTU/hr
Nominal range: 100 to 120 V AC, 200 to 240 V AC
Range: 90–132 V AC, 180–264 V AC
Nominal range: 50–60 Hz
Range: 47–63 Hz
9.5 A peak at 100-V AC
4.5 A peak at 208 V AC
950 VA at 100 V AC
770 W
15 A (subcycle duration)
12 ms at 770 W
12 V DC
12 V DC
Climate Savers Platinum Efficiency (80 Plus Platinum
certified)
Overview