Ricoh 4700W System Settings - Page 36
Browse online or download pdf System Settings for All in One Printer Ricoh 4700W. Ricoh 4700W 42 pages. Savin copier operating instructions
Print Page
DolphinGB-Syst-F_V4_FM.book Page 24 Wednesday, May 2, 2001 1:19 PM
User Tools (System Settings)
General Features 3/3
❖ ❖ ❖ ❖ Panel Tone
Specifies whether or not the machine should emit a tone when the keys on the
panel are pressed.
• On
2
• Off
Note
❒ Default: On
❖ ❖ ❖ ❖ Ready Tone
Specifies whether or not the machine should emit a tone when the "Ready"
message is displayed.
• On
• Off
Note
❒ Default: On
❖ ❖ ❖ ❖ Copy Count Display
Specifies the type of display for the copy count.
If you press the [Up] key, the display counts upwards, if you press the [Down]
key, the display counts downwards.
• Up
• Down
Note
❒ Default: Up
❖ ❖ ❖ ❖ Panel Off Level
Specifies the energy saving level for when the machine enters standby mode.
Note
❒ Default: Level 2
❒ The level can be set from 1 to 4.
Level
Standby level 1
Standby level 2
Standby level 3
Standby level 4
*1
If the warm-up time is set to 0 seconds, it will take longer to print continuous
24
copy jobs. (Continuous copying speed reduction.)
Energy saving
Compared to normal operation, approx. 0%
reduction
Compared to normal operation, approx. 10%
reduction
Compared to normal operation, approx. 20%
reduction
Compared to normal operation, approx. 30%
reduction
Warm-up time
*1
Approx. 0 sec.
*1
Approx. 0 sec.
*1
Approx. 0 sec.
*1
Approx. 0 sec.