Ricoh Aficio 1050 Operating Instructions Manual - Page 9
Browse online or download pdf Operating Instructions Manual for All in One Printer Ricoh Aficio 1050. Ricoh Aficio 1050 36 pages. Sap printing
Also for Ricoh Aficio 1050: Manual (12 pages)
Print Page
Bell105sysGB-FIN_FM.book Page 1 Wednesday, April 19, 2000 11:13 AM
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrations might be slightly different from your machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Operator Safety:
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains a
GaAIAs four beam laser diodes array, 10-milliwatt, 770-810 nanometer wavelength for each emitter.
Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety
precautions and interlock mechanisms have been designed to prevent any possible laser beam expo-
sure to the operator.
The following label is located on the internal cover that is revealed when the front cover is opened.
Laser Safety:
The optical housing unit can only be repaired in a factory or at a location with the requisite equipment.
The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is
not repairable in the field. Customer engineers are therefore directed to return all chassis and laser sub-
systems to the factory or service depot when replacement of the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this manual. (For details, see ⇒ P.2 "Machine Types" )
•
Type 1 : 4850MF
•
Type 2 : 4105MF
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality,Infotec recommends that you use genuine Infotec toner.
Infotec shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Infotec parts in your Infotec office product.
Power Source
•
Type 1 : 220 - 240V, 50/60Hz, 10A or more
•
Type 2 : 220 - 240V, 50/60Hz, 12A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see "Power Connection" of the "Copy Reference".
This information is based on our present state of knowledge and is intended to provide general notes
on our products and their uses.
It should not therefore be construed as guaranteeing specific properties of the products described or
their suitability for particular applications.
Any existing industrial property rights must be observed. The quality of our products is guaranteed un-
der our General Conditions of Sale.
Read this manual carefully before you use this product and keep it handy for future reference.
For safety, please follow the instructions in this manual.