Ricoh SP 150w Wi-Fi Connection Manual - Page 6

Browse online or download pdf Wi-Fi Connection Manual for All in One Printer Ricoh SP 150w. Ricoh SP 150w 16 pages.
Also for Ricoh SP 150w: Setup Manual (2 pages)

Print Page

12. Select the printer from the list, and click [Next].

The installation starts.

13. After the completion message appears, click [Fin-

ish].

The printer driver and "RICOH Printer" software are installed

on the computer, and "RICOH Printer" icon is created on the

desktop.

You can now print files on the computer from the printer via the

Wi-Fi router by selecting "Print" from the "File" menu of applica-

tions or use the functions of "RICOH Printer".

• The Wi-Fi router set at the time of the installation can be

changed using "RICOH Printer". For details, see page 4 "Set-

ting an Access Point using "RICOH Printer"".

Setting an Access Point using "RICOH

Printer"

You can set an access point (Wi-Fi router) to use for wireless con-

nection with the printer using "RICOH Printer" on the computer.

• Install "RICOH Printer" to your computer first. For details, see

page 3 "Installing the Printer Driver and "RICOH Printer"

Software".

1. Press and hold the

printer.

2. Connect the computer with the printer using a

USB cable, via a Wi-Fi router, or using the Soft AP

function.

• If the Wi-Fi setting has been set up, you can connect the

computer with the printer via a Wi-Fi router. Enable the Wi-Fi

connection by pressing and holding the

printer for 1 second or longer. The power indicator turns blue.

• For the Soft AP connection, see page 6 "Connecting with a

Computer Directly".

power key to turn on the

power key on the

3. Click "RICOH Printer" icon on the desktop.

The application is launched.

4. Click [Settings].

5. Click [Wi-Fi].

6. If the Wi-Fi setting is disabled, toggle the [WLAN]

switch to enable the Wi-Fi function.

Available access points are searched for, and found access

points are displayed in the list.

• Click [Manual Wi-Fi] to specify an access point by manually

specifying SSID, encryption method, and password. After

specifying an access point manually, click [Connect] to estab-

lish a connection.

7. Click an access point to use.