Ricoh SP 212SFNw Setup Manual - Page 24

Browse online or download pdf Setup Manual for All in One Printer Ricoh SP 212SFNw. Ricoh SP 212SFNw 25 pages.
Also for Ricoh SP 212SFNw: Setup Manual (25 pages), Setup Manual (24 pages), Setup Manual (24 pages), Setup Manual (24 pages), Setup Manual (24 pages), Setup Manual (24 pages), Setup Manual (24 pages)

Print Page

Configuring the IPv4 Address Settings Using the Smart

Organizing Monitor

On the [Start] menu, click [All Programs].

Click [Smart Organizing Monitor for SP xxx Series].

Click [Smart Organizing Monitor Status].

Click the [User Tools] tab.

Click [IP Address].

Enter the MAC address.

For the MAC address you need to enter, check the items on the configuration page. De-

pending on your connection method, the item you need to check on the configuration page

varies.

For Ethernet connection

Interface Information

For wireless connection

Wireless Status

Enter the IP address you want to change.

The computer's IP address can be ascertained using Command Prompt. To display the IP

address, open Command Prompt, enter "ipconfig", and then press the [Enter] key.

Enter the IP address of the computer being used with the variable part in the IP address

modified.

Specify the subnet mask and default gateway address as required in accordance with the

network environment.

Click [OK].

If the configuration is successful, the message "IP Address has been set well." appears.

If the configuration fails, the message "Setting IP Address failed. Try again." appears. If this

happens, repeat the procedure from Step 6.

Click [OK].

Click [Close].

M214-8618