Ricoh SP 5200SR Safety Information Manual - Page 16

Browse online or download pdf Safety Information Manual for All in One Printer Ricoh SP 5200SR. Ricoh SP 5200SR 36 pages. User guide

Print Page

3. Safety Information for This Machine

• Before installing or removing options, always disconnect the power cord plugs from the wall

outlet and allow time for the main unit to fully cool. Failing to take these precautions could result

in burns.

• Do not look into the lamp. It can damage your eyes.

• Protect the machine from dampness or wet weather, such as rain and snow.

• For environmental reasons, do not dispose of the machine or expended supply waste at

household waste collection points. Disposal can take place at an authorized dealer.

• Wait at least one hour after power off before replacing parts. Not allowing the machine to

cool may result in burns.

• Type 1 weighs approximately 45 kg (99.2 lb.), type 2 weighs approximately 47 kg (103.7

lb.), and type 3 weighs approximately 52 kg (114.7 lb.). When moving the machine, use the

inset grips on both sides, and lift slowly. The machine will break or cause injury if dropped.

• When moving the machine after use, do not take out the print cartridge to prevent toner spill

inside the machine.

• Do not connect the Ethernet port of the machine to a network that may supply excess voltage,

such as a telephone line. Doing so may result in fire or electric shock.

Handling the machine's interior

This section explains safety precautions about handling the machine's interior.