Ricoh SP204SF Software Installation Manual - Page 13
Browse online or download pdf Software Installation Manual for All in One Printer Ricoh SP204SF. Ricoh SP204SF 21 pages. Software installation guide
Also for Ricoh SP204SF: Quick Installation Manual (2 pages)
Print Page
3. Changing the IP Address Settings
Changing the IP Address Settings Using the Control Panel (SP
202SN/203SFN/204SFN/204SN only)
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
5.
Make sure [DHCP Activated] is set to [On].
After a setting has been changed, the machine automatically reboots itself.
Configuring the Machine's IPv4 Address Manually
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
13