Ricoh SR770 Installation Manual - Page 2
Browse online or download pdf Installation Manual for All in One Printer Ricoh SR770. Ricoh SR770 4 pages. Punch kit type for machine code: g060; g080; g082; g106
Print PageStand the external tray of the printer.
³ Stand it vertically.
· Fold it over the top of the printer.
Insert the rail with a wheel in the mounting bracket.
Temporarily fasten one long screw in the position, as
shown. Turn the screw three to four times by hand.
Insert the rail, assembled in step , into the base area
under the printer.
ZHXH330J
ZHXH340J
Hook the hole of the mounting bracket on the screw
temporarily fastened in step .
Holding the mounting bracket using both hands, move it
in the direction of up ( ) to the right ( ).
With the left corner of the mounting bracket in the
position pointed by the arrow on the printer, fasten the left
side of the mounting bracket using a long screw and the
provided screwdriver. Also tighten the screw on the right
side temporarily fastened in step .
Temporarily fasten the two long screws in the positions
shown. Turn the screws three to four times by hand.