Ricoh Aficio BP20N Administrator's Manual - Page 31

Browse online or download pdf Administrator's Manual for Printer Ricoh Aficio BP20N. Ricoh Aficio BP20N 45 pages. B/w printer
Also for Ricoh Aficio BP20N: Brochure & Specs (2 pages)

Print Page

TCP/IP

Use these instructions to install the device on a TCP/IP network using Web Aficio BP20N.

Installation Procedure

There are two stages required to install the device on a TCP/IP network using Web Aficio

BP20N:

Configure the Aficio BP20N

Test Print

Configure the Aficio BP20N

NOTE: The TCP/IP settings for the device will have been set up when completing

the Enabling Web Aficio BP20N section.

To complete the installation of the device, perform these steps:

Enable Web Aficio BP20N (see "Enabling Internet Services" on page 3-5).

At the Web Aficio BP20N Home Page for the Aficio BP20N, select the [Network

Administrator] tab.

Click TCP/IP menu in the left frame.

Check if the TCP/IP Configuration details are correct. If any of the details are incorrect

then enter the correct information.

NOTE: DHCP automatically assigns IP addresses and is the default setting. If the

IP Address needs to be edited but is unavailable, select IP Address Assignment

Method and then Static to continue.

Administratior Guide

This procedure explains how to use Web

device.

A print job should be submitted to ensure the device has been installed and

configured correctly.

Choose the [IP Address Assignment Method] required.

Enter the [IP Address].

to configure the

Aficio BP20N

Page 3-7