Cisco SPA500S Quick Start Manual
Browse online or download pdf Quick Start Manual for IP Phone Cisco SPA500S. Cisco SPA500S 2 pages. 32-button attendant console for cisco small business spa 500 series ip phones
Also for Cisco SPA500S: Specifications (3 pages), Quick Start Manual (8 pages), Quick Start Manual (3 pages)
Print Page
Quick Start Guide
Cisco Small Business Pro
SPA500S 32-Button Attendant Console for Cisco
Small Business Pro SPA500 Series IP Phones
Package Contents
• SPA500S 32-Button Attendant Console
• Quick Start Guide
• Attachment Arm
• Attachment Arm Screws (2)
• Auxiliary Interconnect Cable
• Stand
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
1
Connecting to the SPA500
Series IP Phone
The following procedure describes how to attach the SPA500S to a SPA500
Series IP Phone.
S
1
Turn both the SPA500 Series IP Phone and the SPA500S face down.
TEP
Align the screw hole in the SPA500 Series IP Phone with one of the
S
TEP
2
holes on the attachment arm.
S
3
Insert the pegs on the attachment arm into the peg holes on the
TEP
SPA500 Series IP Phone.
S
4
Using an attachment arm screw, secure the attachment arm to the
TEP
SPA500 Series IP Phone.
S
5
Align the right screw hole in the SPA500S with the unused hole on the
TEP
attachment arm.
S
6
Insert the pegs on the attachment arm into the peg holes on the
TEP
SPA500S.
S
7
Using an attachment arm screw, secure the attachment arm to the
TEP
SPA500S.
C
Do not plug a telephone line cord into the AUX port. Use
AUTION
only the auxiliary cable provided with the SPA500S.
Locate the AUX IN port on the back of the SPA500S. Connect one end
S
TEP
8
of the auxiliary cable to this port.
S
9
Locate the AUX port on the back of the SPA500 Series IP Phone.
TEP
Connect the other end of the auxiliary cable to this port. The SPA500S
is powered by the auxiliary cable with the SPA500 Series IP Phone; no
additional power source is required.
S
10
Route the auxiliary cable inside the cable slot of the SPA500S.
TEP