Ricoh Aficio MP 201SPF Quick Manual - Page 3

Browse online or download pdf Quick Manual for Printer Ricoh Aficio MP 201SPF. Ricoh Aficio MP 201SPF 5 pages. Digital imaging system power, performance and exceptional security
Also for Ricoh Aficio MP 201SPF: Quick Manual (6 pages)

Print Page

the next original and press the Start button for the remaining originals. If you only have a one page

document, press the pound key "#" and the fax machine will start sending the document immediately.

- 2

END

SIDED ORIGINAL

1. Press Tx Mode (on the panel)

2. Use the arrow keys to select 2 Sided Tx, press OK

3. Use the arrow keys to select 2 Sided from the first page OR 1 Sided from the first page

if you are using a cover page that is single sided¨or other selection, press OK, press esc

when done

4. Dial the number using the numeric key pad or press the pre programmed button(s) on

the left hand side

5. Place your originals in the document feeder

6. Press the Start button

Note: when sending a fax you can look up the pre-programmed fax numbers by pressing the Check

Destination button, choose one of the search options (i.e. list) and select it for sending, press Start

ROGRAM

UMBERS IN THE

1. Press the User Tools /Counter button

2. Select System Settings by using the arrow keys and press OK

3. Arrow down and select Administration Tools press OK

4. Arrow down and select Address Book Management press OK

5. Select Program/Change to program or change an existing quick dial and press OK

6. The first available quick dial location will appear or make your selection from (001-032) by

using the numeric keypad and press OK.

7. Enter the name using the quick dial keypad, (example: using the speed dial keypad on the

left hand side press the 01 button once for the "A" or twice for a "B" or three times for a

"C" use the arrow keys near the display to cursor over. Use the 02 button for D E or F)

8. Press OK.

9. Select Details

10. Select Fax Setting then press OK

11. Enter the fax number using the blue numeric keypad, press OK

12. Press END, press OK

DDRESS

OOK

Page 3 of 5