Cisco SPA525G - Small Business Pro IP Phone VoIP User Manual - Page 12

Browse online or download pdf User Manual for IP Phone Cisco SPA525G - Small Business Pro IP Phone VoIP. Cisco SPA525G - Small Business Pro IP Phone VoIP 18 pages. Vpn status
Also for Cisco SPA525G - Small Business Pro IP Phone VoIP: Quick Start Manual (2 pages), Setup And User Manual (19 pages), User Manual (22 pages), Quick Reference Manual (4 pages), Quick Start Manual (14 pages), Quick Start Manual (5 pages), Manual (9 pages), Instructions (4 pages), Quick Start Manual (5 pages), Quick Reference Card (2 pages), Quick Start Manual (8 pages), Quick Reference Manual (4 pages), User Manual (2 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (4 pages), Manual (3 pages), Manual (3 pages), User Manual (7 pages), Using (2 pages), Instructions (4 pages), Quick Start Manual (2 pages), User Manual (50 pages)

Print Page

Cisco SPA Phones User Guide

DNS SRV Auto Prefix

Select Yes.

User ID

PBXware extension number. Example: 1003.

Password

The Secret of the extension as received in the e-mail associated with this

extension. Example: _%Z4M3*Ts9y7. A password is generated automatically

for each newly created extension.

Click on the Submit All Changes button.

You'll have to wait sometime prior for the device to reboot. If everything is done

as above described, you should have successfully registered your phone to

PBXware. Dial *123 to verify registration.

4.2

Auto Provisioning

This chapter describes how to set UAD settings, create PBXware extension and register

the phone using DHCP or Static IP address.

The following topics are covered:

Creating Extension

Registering Phone

4.2.1

UAD Settings

1. Login to PBXware web administration interface

Open a new browser window and enter the IP address in order to access the

PBXware web administration login screen. Example: http://192.168.1.10.

2. UAD settings

Navigate to Settings:UAD.

Make sure Cisco SPA UAD is enabled. To check the UAD status click on the edit

icon corresponding to your Cisco SPA phone.

Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP

is set to Yes.