Cisco SPA525G - Small Business Pro IP Phone VoIP User Manual - Page 5

Browse online or download pdf User Manual for IP Phone Cisco SPA525G - Small Business Pro IP Phone VoIP. Cisco SPA525G - Small Business Pro IP Phone VoIP 18 pages. Vpn status
Also for Cisco SPA525G - Small Business Pro IP Phone VoIP: Quick Start Manual (2 pages), Setup And User Manual (19 pages), User Manual (22 pages), Quick Reference Manual (4 pages), Quick Start Manual (14 pages), Quick Start Manual (5 pages), Manual (9 pages), Instructions (4 pages), Quick Start Manual (5 pages), Quick Reference Card (2 pages), Quick Start Manual (8 pages), Quick Reference Manual (4 pages), User Manual (2 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (3 pages), Quick Start Manual (4 pages), Manual (3 pages), Manual (3 pages), User Manual (7 pages), Using (2 pages), Instructions (4 pages), Quick Start Manual (2 pages), User Manual (50 pages)

Print Page

"Release" denotes the exact version of your PBXware.

Installation

This chapter describes how to install and connect the phone to the electrical power and

data network as well as how to apply factory settings.

The following topics are covered:

Factory Settings

3.1

Power Adapter

1. Connect the Network and Power

Connect the DC plug on the power adapter to the DC port on the phone and

connect the other end of the power adapter into an electrical power outlet.

Connect the ethernet cable between the Internet port on the phone and the

network port on a router or switch to access LAN.

N O TE

AC adapter. M ake sure the Ethernet cable and router or switch is Power ov er

Ethernet (PoE) com pliant.

3.2

Power over Ethernet (PoE)

1. Connect the Network (only)

Using a regular ethernet cable, your phone can be powered from a Power over Ethernet

(PoE) compliant router or switch.

Connect the Ethernet cable between the Internet port on the phone and an

available port on the in-line power router or switch.

N O TE

AC adapter. M ake sure the Ethernet cable and router or switch is Power ov er

Ethernet (PoE) com pliant.

3.3

1. Find out your Cisco SPA phone IP Address

For Cisco SPA phone mode SPA301 lift the handset and enter ****, enter 110

and press #, the IP address will be recited.

For Cisco SPA phone models SPA502G, SPA504G, SPA508G, SPA509G press the

If y ou are using Power ov er Ethernet (PoE), y ou don't need to connect the

Requirements