ActronAir QTB-1000 User Manual - Page 6

Browse online or download pdf User Manual for Air Conditioner Accessories ActronAir QTB-1000. ActronAir QTB-1000 15 pages.

Print Page

Mode Window Options

From the home screen, touch the operation status display to

reveal the adjustable options.

Operation Mode:

Available options are Auto, Cool, Heat and Fan Mode

Fan Speed:

Available option are Auto (if applicable), High, Medium and Low

fan speeds.

NOTE:

Auto Fan is a variable fan technology that automatically adjusts airflow

depending on zone/s demand. The system will maintain the right amount

of airflow anytime no matter how many zones are open or closed. Auto is

only available in a zoned system.

Other Options:

Toggle the switch to the right to activate the selected option.

Available options are:

Constant fan - Indoor fan will continuously run regardless

if set temperature is achieved.

Away mode - The system will use Away Mode temperature

settings.

Quiet mode - The system limit system capacity to lessen

the sound of operation.

NOTE:

It is possible to change the option anytime even when OFF.

The system will be on selected options when turned ON.

Operation mode

Fan speed

Other options

Temperature Set Point

To adjust temperature set point, touch the screen on the set point area to

reveal the ' ' and ' ' adjustment icon. Touching ' ' will increase set point

temperature, while touching ' ' will decrease the value.

Auto Mode

In Auto Mode, there are two adjustable set point temperatures. These

temperatures are also called 'Set Temperature Range'. During operation,

the system will always maintain the room temperature within this range.

The left temperature is 'Heat to' set point. When the room temperature

falls below this temperature, system will start heating until 'Heat to' set

point is achieved.

The right temperature is 'Cool to' set point. When the room temperature

is above this temperature, the system will start cooling until 'Cool to' set

point is achieved.

NOTE:

'Cool to' setpoint is always higher than 'Heat to' set point. Minimum temperature

difference between the two (deadband) is 1.

Cool / Heat Mode

Shows only one set temperature. In cooling, when the room

temperature is above this temperature, the system will cool until this

set point is achieved. In heating, when the room temperature falls

below this temperature, the system will heat until this set point is

achieved.

Fan Mode

Will not show the set temperature. The system will only circulate air.

Touch to reveal adjustment icon

Fan Mode