Epson EF11 Quick Setup - Page 2

Browse online or download pdf Quick Setup for Projector Epson EF11. Epson EF11 4 pages.
Also for Epson EF11: Quick Start Manual (8 pages)

Print Page

Adjust the image

To reduce or enlarge the image, press the

remote control. Select Settings and press Enter. Select Installation,

select Zoom, and press Enter. Press the left or right arrow buttons on

the remote control to adjust the image size, then press Enter. Press the

menu button to exit the menu system.

To adjust the image height, press and hold the foot release lever on the

bottom of the projector to extend the front adjustable foot. Release the

lever to lock the foot in the desired position.

Move the focus lever on top of the projector left or right to adjust the

image sharpness.

If your image looks like

to one side of the screen at an angle. Place the projector directly in front

of the center of the screen, facing the screen squarely. If you can't move

the projector, use the

button on the remote control to correct the

image shape.

Your projector automatically adjusts an image that looks like

but if necessary you can press the

correct it.

Note: For more adjustment methods, see the online User's Guide.

Using the remote control

Install two AAA batteries as shown below.

Turn projector

on or off

Enter a selection

Access projector menus

Turn off audio and

video temporarily

Turn volume up

or down

menu button on the

, you may have placed the projector off

button on the remote control to

Go back to previous

function

Navigate menus

Control playback of

connected device

Choose which source to

display

Adjust image shape

(keystone)

Troubleshooting

•

If you see a blank screen, check the following:

•

Make sure your computer or video device is properly connected.

•

Make sure the status light on the projector is blue and not flashing.

•

Press the

remote control to wake the projector from standby or sleep mode,

if necessary.

•

If you see a blank screen when a computer is connected, check the

following:

•

On some Windows

and press F7 or the function key that lets you display on an external

monitor. It may be labeled CRT/LCD or have an icon such as

On Windows 7 or later, hold down the Windows key and press P at

the same time, then click Duplicate.

•

If you're using a Mac laptop, open System Preferences and

select Displays. Click the Arrangement tab and select the Mirror

Displays checkbox.

•

If the projector does not respond to remote control commands, make sure

the batteries in the remote control are installed correctly. Replace the

batteries, if necessary.

Registration

online at www.epson.com/webreg.

Where to get help

Manual

For more information about using the projector, you can view or download the

online manual from the Epson website, as described below.

Internet support

Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)

and search for your product to download software and utilities, view the

manual, get FAQs and troubleshooting advice, or contact Epson.

Telephone support services

To use the Epson

is available for the duration of your warranty period. You may also speak with a

support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6

and 7

to 4

subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase screens or other accessories from an Epson authorized reseller.

To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can

purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca

(Canadian sales).

power button or the

button on the projector or

laptops, you may need to hold down the Fn key

PrivateLine

Support service, call (800) 637-7661. This service

to 8

, Pacific Time, Monday through Friday,

, Pacific Time, Saturday. Days and hours of support are