Tab
Initial Settings
Procedure 2: Settings to Specify Using Web Image Monitor
It is necessary to specify the values in [Device Settings], [Printer], [Fax], [Interface], [Network], [Security]
and [Webpage] in [Configuration] in [Device Management] of Web Image Monitor within the CC-
certified range.
Before specifying system settings, the administrator should refer to the Web Image Monitor help. The
CC-certified Web Image Monitor help can be downloaded from the following URL:
http://support-download.com/services/device/webhlp/nb/gen/v140cc1/en/
The help that appears when the "?" icon (Help button) in Web Image Monitor's header area is clicked
may have changed after receiving CC evaluation.
Before specifying the settings, install the Web browser specified in "CC-Certified Operating
Environment" in this manual on the client computer, and then connect the client computer and MFP to the
network that can be accessed only by the administrator.
For details about how to launch Web Image Monitor, see "Using Web Image Monitor" in "Monitoring
and Configuring the Machine", Connecting the Machine/ System Settings.
1. Specifying [Device Settings]
The administrator must specify the settings in [Device Settings] within the ranges shown in the following
table.
• Set "Kerberos Authentication"
Authentication Management" to [Windows Auth.], as described on page 15 "2. Specifying [User
Authentication Management]"".
Category
Device Settings
Device Settings
Device Settings
Item
Folder Setting
"Encryption Algorithm" to the values specified when setting "User
Item
Date/Time
Set Date
Date/Time
Set Time
Date/Time
Time Zone
Settings
[On]
Settings
Set the appropriate date.
Set the appropriate time.
Set the appropriate time zone.
Preparation for Use
21
Print Page