Ricoh P C311W Setup Manual - Page 8
Browse online or download pdf Setup Manual for Printer Ricoh P C311W. Ricoh P C311W 17 pages.
Print Page
- 1. Setting up the Machine
- 2. Configuring the Network Setting
- 3. Check How the Computer Is Connected
- 4. Use the Machine from a Smart Device
- 5. Connecting the Machine Via Wi-Fi
- 6. Easy Setup Using the Wi-Fi Setup Wizard
- 7. Easy Setup Using the WPS Button
- 8. Easy Setup Using a PIN Code
- 9. Installing the Printer Driver
- 10. For Windows
- 11. Control Panel Sheet
Connecting to devices using the WPA2-PSK or
Mix Mode WPA2/WPA authentication
5.
Enter the encryption key using the [ ] or [ ] key, and then
press the [OK] key.
Password
Key :
(8-63 chars/64 hex)
WPA2-PSK
As the passphrase, you can enter either 8 to 63 ASCII
characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).
For details about checking the encryption key, see "Checking the
SSID and Encryption key".
6.
Press the [OK] key.
Are you sure to connect?
(OK/Back)
7.
Check the result.
Connection has succeeded:
Connect succeed!
Connection has failed:
Connect failed!
8.
Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
9.
Configuring the Wi-Fi settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 10 "3. Installing
the Printer Driver".
6
ECB225
ECB226
DSG355
DSG356
Connecting to the devices using the Open
system or Shared Key authentication
5.
Press the [ ] or [ ] key to select the encryption method,
and then press the [OK] key.
1
5
Encryption
None
WEP 64 bit Hex
WEP 64 bit ASCII
The maximum number of characters that can be entered in the
encryption key field depends on the encryption method settings.
● Do not select [None] except in special cirmunstances. If
selected, the security system will not work.
6.
Enter the encryption key using the [ ] or [ ] key, and then
press the [OK] key.
Password
Key:
(5 chars)
Open system
For details about checking the encryption key, see "Checking the
SSID and Encryption key".
7.
Enter the ID using the [ ] or [ ] key, and then press the
[OK] key.
Password
ID: 1
(Enter 1-4)
The ID is used for identifying the encryption key. You can
register four encryption keys (ID 1 to 4).
8.
Enter the password.
9.
Press the [OK] key.
Are you sure to connect?
(OK/Back)
10. Check the result.
Connection has succeeded:
Connect succeed!
Connection has failed:
Connect failed!
11. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
12. Configuring the Wi-Fi settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 10 "3. Installing
the Printer Driver".
ECB212
ECB213
ECB214
ECB226
DSG355
DSG356