Ricoh P C600 Manual - Page 8

Browse online or download pdf Manual for Printer Ricoh P C600. Ricoh P C600 16 pages.

Print Page

2. Safety Information for This Machine

Requirements for Using Power Plugs and Cords

WARNING

• Avoid taking the following actions because doing so can result in fire or

electric shock:

• Using any power supply voltage or frequencies other than those that

match the specifications shown

• Using multi-socket adaptors

• Using extension cords

• Touching the prongs of the power cable's plug with anything metallic

• Avoid applying the following actions to power cords because doing so can

result in fire or electric shock:

• Damaging them

• Bundling them

• Modifying them

• Putting heavy objects on them

• Pulling them forcibly

• Bending them forcibly

• The supplied power cord or cords are for use with this machine only. They

cannot be used for appliances other than this machine. Also, do not use

power cords other than the power cord or cords supplied with this machine.

Doing so can result in fire or electric shock.

• Do not handle the power cord plug with wet hands. Doing so can result in

electric shock.

• To prevent fire or electric shock, disconnect the plug and the power cord from

the wall outlet at least once a year and check them. If any of the following

conditions exist, do not use the plug and the power cord continuously, and

consult your dealer or service representative.

• There are burn marks on the plug

• The prongs on the plug are deformed

• The power cord's inner wires are exposed or broken

• The power cord's coating is cracked, dented, or damaged

• When the power cord is bent, the power turns off and on

• Part of the power cord becomes hot

CAUTION

• Be sure to push the power cord plug fully into the wall outlet. Also, do not

push it into loose and unstable wall outlets likely to cause a contact failure.

Doing so can result in heat generation.

CAUTION

• If you do not use the machine for a long period of time such as consecutive

holidays, be sure to disconnect the power cord plug from the wall outlet for

reasons of safety.

• When disconnecting the power cord from the wall outlet, make sure to pull

the plug, not the cord. Do not pull the power cord forcibly. Doing so can

damage the power cord, possibly resulting in fire or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and

the area around the prongs at least once a year. Allowing dust to build up on

the plug constitutes a fire hazard.

• When performing maintenance on the machine, disconnect the power cord

from the wall outlet for safety.

• Power Source

220-240V,7A,50/60 Hz

Please be sure to connect the power cord to a power source as above.

For users in Norway, this product is also designed for an IT power distribution

system with phase-to-phase voltage of 230V.

Requirements during Emergencies

WARNING

• Be sure to install the machine as close as possible to a wall outlet so that you

can disconnect the power cord plug easily in an emergency.

• If the machine behaves unusually as follows, turn off the power immediately.

After turning off the power, make sure to disconnect the power cord plug

from the wall outlet, and then contact your service representative and report

the problem. Continuously using the power cord can result in fire or electric

shock.

• The machine is emitting smoke

• The machine is emitting odors

• Metal objects or other foreign objects have fallen inside the machine

• Water or other fluids have fallen inside the machine

• Do not touch this machine if a lightning strike occurs in the immediate vicinity.

Doing so could result in electric shock.