Ricoh Pro 8120s Operating Instructions Manual - Page 24
Browse online or download pdf Operating Instructions Manual for Printer Ricoh Pro 8120s. Ricoh Pro 8120s 36 pages. Pro 8100s; pro 8110s; pro 8120s
Also for Ricoh Pro 8120s: Specifications (8 pages), User Manual (28 pages), User Manual (44 pages), Operating Instructions Manual (8 pages)
Print Page
2. Handling Paper
When printing on preprinted paper, note the following:
• Toner may not adhere to preprinted images as well as it does to plain white paper. Check the print
quality in advance.
• Before using preprinted paper, check that the ink is completely dry. Also, make sure that the ink
does not transfer to the rollers and make the inside of the machine dirty.
• The machine does not support preprinted paper on which images and/or text are printed using
toner.
• To print on paper on which a frame is printed, print in an area 2.5 mm (0.10 inches) or more from
the frame.
Major precautions about ink used for preprinted paper are as follows:
• Use a non-volatile oil based and heat resistant ink for preprinted paper. Do not use ink that melts,
vaporizes, dissolves, or delaminates when exposed to heat. For details, see page 6 "Resistance to
Heat".
• Use the minimum amount of ink on preprinted paper. Use screen printing to print on large areas.
• Do not use powders, such as corn starch, rosin, or talc, to dry ink on preprinted paper.
• Do not use the following types of ink on preprinted paper:
• Rapid binding ink
• Evaporative drying ink
• Low-temperature fixing ink
• Precipitation drying ink
• Penetration drying ink
• Soy ink
Colored Paper
Colored paper is paper that is treated lightly with colorant throughout. Some colors of paper cannot be
used. For details, contact your sales representative or service representative.
Prepunched Paper
Prepunched paper must be smooth and flat to be used in the machine. Prepunched paper that is warped
or torn cannot be used. Before printing on prepunched paper, remove any dust or trimmings that were
produced during the punching process.
To print on prepunched paper, print in an area 3 mm (0.12 inches) or more from the edge of the hole.
The holes in the paper must be within the following conditions:
22