Ricoh Pro C7100x Starter Manual - Page 32

Browse online or download pdf Starter Manual for Printer Ricoh Pro C7100x. Ricoh Pro C7100x 40 pages.

Print Page
Ricoh Pro C7100x Starter Manual
3. Other Information for This Machine
Laser Safety for Type 2 and 4
This machine complies with the requirements of IEC60825-1:2007 (EN60825-1:2007) for class 1
laser product. The machine contains five VCSELs (Vertical Cavity Surface Emitting Laser), 772–792
nanometer wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees
(maximum) in the vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the
horizontal direction, and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has
forty light sources and the maximum output power of each light source is 1.23 milliwatt.
The following label is attached on the rear of the machine.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Laser Safety for Media Identification Unit Type S3
Media Identification Unit (optional) complies with the requirements of IEC60825-1:2007
(EN60825-1:2007) for class 1 laser product. Media Identification Unit contains one VCSEL (Vertical
Cavity Surface Emitting Laser), 772–792 nanometer wavelength. The beam divergence angle is 5.3
degrees (minimum) and 7.9 degrees (maximum) in the vertical direction, and 5.3 degrees (minimum)
and 7.9 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous
Wave (CW) mode. The VCSEL has twelve light sources and the maximum total output power is 2.5
milliwatt.
The following label is attached on the bottom of the machine.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
30