Ricoh SP 1210N Quick Setup Manual - Page 11
Browse online or download pdf Quick Setup Manual for Printer Ricoh SP 1210N. Ricoh SP 1210N 28 pages. Quick installation guide
Also for Ricoh SP 1210N: Quick Installation Manual (2 pages)
Print Page
1
Carton Components
1
Carton components may vary from one country to another.
Save all packing materials and the printer carton in case for any reason you must ship your printer.
1
2
3
4
5
1. Face-down output tray support flap 1
(Support flap 1)
2. Control panel
3. Manual feed paper guide
4. Manual feed slot
5. Manual feed slot cover
CD-ROM
(including Quick Setup Guide, User's
Guide and Network User's Guide)
The Network cable is not a standard accessory. Buy the appropriate cable for the interface you are going to use.
USB cable
• Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters).
• Your printer has a USB interface that is compatible with the USB 2.0 specification. This interface is also
compatible with Hi-Speed USB 2.0; however, maximum data transfer rate will be 12 Mbits/s. The printer can
also be connected to a computer that has a USB 1.1 interface.
• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer
driver installation process.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB
port on a keyboard or non-powered USB hub.
Network cable
• Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
10
9
8
7
6
6. Paper tray
7. Front cover
8. Power switch
9. Ventilation hole
10.Face-down output tray
Drum Unit Assembly
(including Toner Cartridge)
Getting Started
Quick Setup Guide
(For North America, Asia)
Quick Install Guide
(For EU, North America)
USB cable
(For Asia only)
9