Cisco Unified 8961 Features - Page 6

Browse online or download pdf Features for IP Phone Cisco Unified 8961. Cisco Unified 8961 35 pages. Cisco systems telephone
Also for Cisco Unified 8961: Release Notes (16 pages), Overview (30 pages), Setup Manual (4 pages), Administration Manual (8 pages), User Manual (48 pages), User Manual (10 pages), Quick Start (2 pages), User Manual (22 pages), Setup (4 pages), Quick Start Manual (2 pages), Quick Reference Manual (3 pages), Manual (12 pages), Quick Reference (4 pages), Quick Glance (3 pages), Quick Manual (10 pages), Quick Start Manual (2 pages), (Portuguese) Quick Start Manual (2 pages)

Print Page
Cisco Unified 8961 Features
Buttons and Hardware
6
Navigation pad and Select button
7
Conference button
8
Hold button
9
Transfer button
10
Keypad
11
Speakerphone button
12
Mute button
13
Headset button
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
6
The four-way Navigation pad allows you to scroll through menus, highlight items, and
move within a text input field.
The Select button (center of the Navigation pad) allows you to select a highlighted item.
The Select button is lit (white) when the phone is in Power Save or Power Save Plus mode.
Press the Select button to override Power Save and Power Save Plus mode.
Creates a conference call.
Places a connected call on hold and toggles between an active and held call.
Transfers a call.
Allows you to dial phone numbers, enter letters, and choose menu items by entering the
item number.
Selects the speakerphone as the default audio path and initiates a new call, picks up an
incoming call, or ends a call. During a call, the button is lit green.
The speakerphone audio path does not change until you select a new default audio path
(for example, by picking up the handset).
If external speakers are connected, the Speakerphone button selects them as the default
audio path.
Toggles the microphone on or off during a call. When the microphone is muted, the button
is lit red. When muted, you can hear the other parties on the call, but they cannot hear you.
Selects the headset as the default audio path and initiates a new call, picks up an incoming
call, or ends a call. During a call, the button is lit green.
A headset icon
in the phone screen header line indicates that the headset is the default
audio path. This audio path does not change until you select a new default audio path (for
example, by picking up the handset).
Features of Your Cisco Unified IP Phone