Ricoh GX200 Firmware Update Instructions - Page 5
Browse online or download pdf Firmware Update Instructions for Digital Camera Ricoh GX200. Ricoh GX200 5 pages. Firmware update
Also for Ricoh GX200: Brochure & Specs (8 pages)
Print Page
4. Update the firmware
1.
Making sure that the camera's power is
turned off, switch the mode dial to SCENE.
2.
While pressing the ! button, hold down
the 6 (Playback) button for 2-3 seconds.
• A confirmation message for the firmware update is
displayed on the picture display.
3.
Press the $ button to select [Yes], and
press the MENU/OK button.
• The firmware update starts, and the following
message is displayed on the picture display.
[Checking rewrite file]
[Rewriting program]
4.
The camera automatically turns off and restarts.
• If the message [Incorrect rewriting file] is displayed and the camera is automatically turned off, check the camera model
again and retry the update using the correct firmware.
• The firmware file copied to the SD memory card is deleted when you format the SD memory card. Delete the file if
necessary.
6 (Playback) Button
5
Mode dial
! Button
MENU/OK Button