Cisco Unified IP Phone User Manual - Page 4

Browse online or download pdf User Manual for IP Phone Cisco Unified IP Phone. Cisco Unified IP Phone 38 pages. User guide for cisco unified communications manager 8.5 (sccp and sip)

Print Page
Transfer button
4
Conference button
5
Hold button
6
Navigation bar and
7
Select button
Line 1 and Line 2
8
buttons
1
2
Headset button
9
10 Speakerphone button
11 Keypad
12 Mute button
4
Transfers a call.
Creates a conference call.
Places an active call on hold.
The Navigation bar allows you to scroll through menus and highlight
items. When phone is on-hook, displays phone numbers from your
Placed Call listing (up arrow) or your speed dials (down arrow).
The Select button (in the middle of the Navigation bar) allows you to
select a highlighted item.
Line 1 selects the primary phone line.
Depending on how your system administrator sets up the phone, Line
2 may provide access to:
• Secondary phone line
• Speed-dial number (speed-dial button)
• Web-based service (for example, a Personal Address Book button)
Buttons illuminate to indicate status:
• Green, steady—Active call
• Green, flashing—Held call
• Amber, flashing—Incoming call or reverting call
• Red, steady—Remote line in use (shared line)
• Red, flashing—Remote line on hold
Toggles the headset on or off. When the headset is on, the button is lit.
Toggles the speakerphone on or off. When the speakerphone is on, the
button is lit.
Allows you to dial phone numbers, enter letters, and select menu items
(by entering the item number).
Toggles the microphone on or off. When the microphone is muted, the
button is lit.
OL-23813-01