Ricoh LCIT RT5000 Service Manual - Page 19

Browse online or download pdf Service Manual for Printer Accessories Ricoh LCIT RT5000. Ricoh LCIT RT5000 37 pages.

Print Page
Ricoh LCIT RT5000 Service Manual
REPLACEMENT AND ADJUSTMENT
14. Adjust the image positions in the main scan direction.
•
Do SP2902 003, select Pattern 27, then print the trimming pattern.
•
Do SP1002 and adjust the image position in the main scan direction for
Trays 4, 5, 6, and 7.
•
Print the trimming pattern from each tray of the LCT and from the bypass
tray (if installed).
•
To do this, touch "Copy Window" in the SP display, select a tray, then push
[Start].
•
The distance of the test pattern line from the paper edge for each tray must
be 2 mm. If it is not 2 mm, adjust with SP1002 004 to 007, depending on
which tray is not within the specified 2 mm.
15. Do SP1912 002 (CIS Image Position Adjustment: Normal Paper). This sets the
CIS for operation with standard copy paper.
16. Exit the SP mode.
17. Push [User Tools]> [Adjust Settings for Operators].
18. Once again, do SP1911 (CIS Image Position Adjustment: Feed Setting) and
reset the values for Trays 4, 5, 6, and 7 to "1" (ON).
2 mm
B832-16
B832R932.WMF
10 March 2006