Ricoh M3 Field Service Manual - Page 26

Browse online or download pdf Field Service Manual for Printer Accessories Ricoh M3. Ricoh M3 42 pages. Smart operation panel
Also for Ricoh M3: Field Service Manual (18 pages)

Print Page

2. Mechanism

Key

No key

Screen Startup Mode

As control unit start-up modes, a Normal Startup Mode (power-saving mode) and Quick Startup Mode

are provided. Each mode can be changed over from Screen Features

Screen Startup Mode.

1. Normal Startup Mode (power-saving mode): Default

This is a mode with minimum power. Since the power is reduced to the minimum, normal startup will

take time (start-up time guide: 68 seconds).

2. Quick Startup Mode

In this mode, a minute amount of power is supplied to the screen even when the power is OFF, and

the home screen is displayed immediately when the power is switched ON. (start-up time guideline:

17 seconds)

In Quick Startup Mode, preparations for the next startup are performed even during shutdown.

Therefore, shutdown takes longer than in Normal Startup Mode.

• To avoid preparations for the next startup, press the power button while holding the

"Stop" key until the shutting down message shows up. This may help you shut down smoothly

when you are maintaining the machine.

• When shutdown is performed in Quick Startup Mode, the screen changes in the following

order:

1. Displays the shutting down message on the screen.

2. The screen turns off.

Android control unit

Standard control unit

Does not recover.

Screen Device Settings