Epson ELPDC20 Document Camera Quick Start

Browse online or download pdf Quick Start for Projector Epson ELPDC20 Document Camera. Epson ELPDC20 Document Camera 4 pages. Epson dc-20 document camera (elpdc20)

Print Page

EPSON

DC-20 Document Camera (ELPDC20)

Quick Start

Follow these instructions to display pages from books and documents, and

three-dimensional objects. To use other features, see the User's Guide on the

product's CD-ROM. It provides instructions for using the microscope adapter,

capturing still images, and using the included software.

Before using the product, make sure you read the safety instructions in the

User's Guide on the product's CD-ROM.

Setting up the product

Raise the camera arm.

Connect your projector. Use a VGA cable (included), a composite video

cable (check your projector for available ports), or an HDMI cable (not

included).

Composite video cable

Connect the power adapter.

*412373100*

VGA cable

HDMI cable

Press the

power button to turn on the document camera.

Turn on your projector. Then select the source (port) on the projector that

lets you display the camera image. On the document camera, press the

Source button, if necessary.

Using the product

Place your document on the table under the camera head. Align the

center of your document with the

camera.

Slide the lamp switch to illuminate the document.

Lamp switch

Press the Focus button on the document camera or the Auto Focus

button on the remote control. Your document is automatically focused.

To zoom in or out on part of the image, press the Zoom

Note:

You can also use the remote control to adjust the image.

When you're done using the product, turn it off and lower the camera arm

as shown.

mark on the side of the document

button.